BASICS
SOLID FUEL THREE PASS MANUAL LOAD FLOOR HEATER
Solid fuel manually loaded floor heaters are produced as semi-cylindrical and three-pass. With the three-pass design, it distributes the heat obtained equally to all surfaces, providing maximum heat transfer and fuel savings. The rate of unburned coal is very low since all of the fuel comes into contact with the air with the fan-controlled combustion system. In this way, ideal combustion is provided.
With the movable cast grill used in the combustion chamber, the accumulated ash can be easily discharged into the ash chamber. While the combustion efficiency is increased with the shaking feature, it also provides easy cleaning.
Boilers designed to burn lignite, hard coal and wood type fuels efficiently and environmentally. Boilers designed and produced in TS-303/5 standards have certificates according to 97/23/CE pressure equipment directive H module.
All settings can be made precisely with the LCD screen digital control panel on the boiler.
STANDARD CONTROL PANEL:
With the digital control panel given as standard on the boiler; While controlling the air blowing fan by adjusting the temperature of the installation water to the desired degree, you can monitor the temperature with its digital indicator. You can manually adjust the fan speed. In case of running out of fuel in the boiler (+28°C), it automatically turns off the fan. It prevents unnecessary electricity consumption by controlling the circulation pump; according to the installation water temperature (pump start-up +30 °C, pump cut-out +28 °C). It protects the boiler against overheating (+90 °C) with its safety thermostat.