BASICS

It is the “water pressurization system” which is activated by pressure control as the water demand increases in various buildings and industrial facilities such as apartments, residences, schools, hotels, hospitals. Hydrophores are manufactured with one, two, three or four pumps depending on the flow requirement.

Single Pump Package Hydrophores

It is a full package type with balance tanks. It is ready to use with all its elements.

Installation is easy and inexpensive.

The control switch included in the package ensures the safe and regular operation of the hydrophore. It also does not need an electrical panel.

The electrical panel is ready to be connected to a single-phase socket with the plug-in power cord included in the delivery.

Absolute impermeability is ensured by mechanical seal.

Has level floater to prevent waterless operation, silent check valve, chassis and anti-vibration rubber feet

The number of pump stages is between 4 and 10.

There is a complete stainless steel material option.

It provides extra comfort as the pressure value between input and output is low.

AREAS OF USAGE

Apartments and residences

School, business center and small industrial enterprises

Horizontal Tank Monophase Stainless Package Hydrophores

Horizontal tank mono-phase series hydrophore sets are quiet running, fully automatic, comfortable, packaged boosters prepared for the use water of buildings or pressurized water needs of facilities.

In hydrophores, the centrifugal pump is placed on a horizontal and pedestal type membrane tank.

European safety standards (CE) tanks are used.

The tank has a Butyl membrane in compliance with health standards. The membrane inside the tank complies with German hygiene standards, does not smell in the water and does not produce bacteria.

Quiet working, fully automatic, low electricity consumption, economical to operate, full package with balance tanks.

It should set itself against overheating and strain. No need for additional fuse or electrical panel.

The device is delivered with a cable with a plug at the end and a level float (5 m cable) against waterless operation so that it can be plugged into single-phase sockets in the houses.

All structural elements in contact with water are made of stainless material.

Since the pump is attached to the tank, it doesn’t occupy too much space

Absolute impermeability is ensured by mechanical seal.

Installation is easy and inexpensive.

AREAS OF USAGE

Apartments and residences

School, business center and small industrial enterprises

Hotel and social facilities

Single Pump Package Hydrophores

It is a haydrophore set containing a single-pump with vertical multistage centrifugal pump and the engine block is mounted on the pump.

It is a full package type with balance tanks. It is ready to use with all its elements.

Installation is easy and inexpensive.

These are package hydrophores with step pumps that has quiet, comfortable and reliable operation.

The control switch included in the package ensures the safe and regular operation of the hydrophore. Also, it doesn’t need an electrical panel.

It is ready to be connected to a three-phase socket with the plug-in power cord included in the delivery.

Absolute impermeability is ensured by mechanical seal.
Has level floater to prevent waterless operation, silent check valve, chassis and anti-vibration rubber feet.

The number of pump stages is between 4 and 10.

There is a complete stainless steel material option.

It provides extra comfort as the pressure value between input and output is low.

Single and Multi-Pump Package Hydrophores

Pumps are used in Multi series Hydrophore sets.

The pumps are centrifugal type pumps with vertical shaft, non-self-priming, multi-stage, driven by a standard electric motor with an impeller made of noryl material.
•  The motor output shaft is directly connected to the pump shaft by means of a rigid coupling.
• •The pressure-resistant body and the flow-through components are fixed between the pump top and the bottom using body studs.
• Pump inlet is located at the bottom and the outlet is located at the top.
• When viewed from the motor side, the pump goes clockwise.

AREAS OF USAGE

Places where fine, clean, free of solid particles and fibers, flammable and explosive non-liquids are pumped:
• Drinking water supply and distribution networks,
• Water pressurization in high-rise buildings,
• Water treatment plants,
• In the supply of process water in industrial facilities,
• In health and cleaning works,
• In irrigation facilities,
• In fire extinguishing systems

0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*

©2023 Focus Endüstri

Log in with your credentials

Forgot your details?